108
Order Online: www.waytekwire.com
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
24 Hour FAX: 1-800-858-0319
Cable Ties
CABLE HARNESS MOUNTS
Fir Tree Push Mount
Stock No. 21204
(HellermannTyton No. 151-02901)
Use either tape or cable tie to mount onto harness, then push into a hole on the panel .31" of movement on either side of center to allow for alignment adjustments
FIR TREE MOUNT AND CABLE TIE ASSEMBLIES
Stock No. HellermannTyton No. Tensile Strength Length (L) Max. Bundle Mounting Hole Panel Thickness Mount Length (L2) Mount Length (L3) Mount Width (W3) Mount Height (H2)
21371 150-77940 30 lbs. 5.8 1.38 .252-.280 .028-.193 .460 .500 .200 .295 21372 156-00157 50 lbs. 8 1.75 .252-.280 .028-.193 .460 .540 .200 .295 21373 156-00057 30 lbs. 5.8 1.38 .256-.276 .031-.276 .460 .750 .200 .500 21374 111-85871 50 lbs. 8 1.75 .256-.276 .031-.276 .460 .750 .200 .500
All dimensions in inches
Provides a secure grip in a mounting hole Protects against dirt and other impurities Slides along the strap of the tie for proper orientation Low insertion force and high extraction force Comes pre-assembled with black cable tie Polyamide 6.6 heat stabilized (PA66HS) 185F (85C) -40F (-40C) 221F (105C) -40F (-40C)
EDGE CLIPS
Designed to route bundles by securing them to the edge of a plastic or metal sheet without the need for a mounting hole High extraction force due to the integrated metal clamp that holds the edge clip in place Comes pre-assembled with a 50 lb. tensile strength black cable tie UV resistant, heat stabilized 221F (105C) -40F (-40C)
Stock No. HellermannTyton No. Tensile Strength Approx. Length Approx. Max. Bundle Approx. Panel Thickness Description
21301 156-00539 50 lbs. 8 1.8 .039-.117 Wire bundle runs parallel to edge 21302* 156-00861 50 lbs. 7.9 1.8 .039-.117 Wire bundle runs perpendicular to edge 21303* 156-00864 50 lbs. 8 1.8 .039-.117 Side mounted tie; wire bundle runs parallel
All dimensions in inches
ORDERING NOTE:
*Attached cable tie is outside serrated to reduce bundle chang
Stock No. 21301 Stock No. 21302 Stock No. 21303
Push Nylon Mount Base
Stock No. 21254
(Essentra No. 75102-7 ANC ANCHORS)
Fits a
1
/4"
diameter hole Features concentric circle barbs for extra holding strength For ties up to
3
/8"
wide
Previous Page