85 Call Toll Free 1-800-328-2724 email: sales@waytekwire.com

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov

Wire Coverings & Protection

Typical Straight Cable Entry Seal Right Angle Cable Entry Seal

MICROTORCHES AND HEAT GUNS

Hand Held Butane-Powered Microtorch

Stock No. 536

(Master Appliance No. MT-51H)

2-hour continuous burn time Built-in refillable plastic fuel tank Includes hot air tip and 1" dia. heat shrink attachment 6.1"H x 3"W x 1.3"D Butane not available - shipped dry 2500F (1300C) Maximum

120V 14.5A

Typical Shrink Tube Reflector

Proheat Dual Temp Heat Gun

Stock No. 630

(Master Appliance No. PH-1100)

Compact, light weight, and very easy to use Dual heat: 500F (260C) and 1000F (540C) 16 cubic feet/minute (CFM) air flow

Mini-Trigger Microtorch

Stock No. 541

(Master Appliance No. MT-70)

Removable base for table-top or hand-held use "Hands-free" slide lock allows for continuous use and instant off operation 60 minutes continuous run time with a full charge Durable self-contained, refillable, plastic fuel tank Butane not included - shipped dry 2500F (1300C) Maximum

Warranty does not cover heat elements and does not apply if the unit has been misused, abused or altered

Industrial Model Heat Gun

Stock No. 516

(Master Appliance No. HG-501D)

Aluminum die-cast construction Fixed air intake controls air flow and temperature Heating element easily replaced Non-slip rubber base allows precise positioning 1200F (648C) Maximum

Replacement Heat Element

Stock No. 502

(Master Appliance No. HAS-011K)

Shrink Tube Reflector,

to 3/4" O.D tubing Stock No. 503

(Master Appliance No. A-160-HG)

Shrink Tube Reflector,

to 2" O.D tubing Stock No. 504

(Master Appliance No. A-170-HG)

HEAT SHRINKABLE CABLE ENTRY SEALS (3:1 Shrink Ratio)

Heat-shrinkable cable entry seals (CES) provide a watertight, fume-tight seal where cables enter connection boxes, bulkheads, or other enclosures. The standard CES for thin-wall enclosures consists of a three-part assembly: a heat-shrinkable molded body, a rigid nylon nut, and an O-ring. Provides environmental sealing and screen continuity to a bulkhead as a cable passes through Heat Shrink Type: Raychem RT-301 Raychem RW-2019: S1297 Hot Melt Adhesive

Stock No. Expanded I.D Inches (mm) Recovered Inside Diameter Inches (mm) Mounting Hole Diameter Inches (mm) Cable Diameter Range Inches (mm)

Straight 86001 .50 (12.70) .17 (4.32) 1.0 (25.40) .17-.43 (4.32-10.92) 86003 .75 (19.05) .25 (6.35) 1.0 (25.40) .26-.64 (6.6-16.26) 86005 1.12 (28.45) .50 (12.70) 1.38 (35.05) .53-1.02 (13.46-25.91) 86007 1.60 (40.64) .75 (19.50) 2.0 (50.80) .75-1.36 (19.05 -35.54) 86009 2.75 (69.85) 1.43 (36.32) 3.5 (88.90) 1.38-2.75 (35.06-70.48) Right Angle 86002 .50 (12.70) .28 (7.11) 1.0 (25.40) .29-.43 (7.36-10.92) 86004 .75 (19.05) .33 (8.38) 1.0 (25.40) .35-60 (8.89-15.24) 86006 1.10 (27.94) .38 (9.65) 1.37 (34.80) .53-1.02 (13.46-25.97) 86008 1.60 (40.64) .62 (15.75) 2.0 (50.80) .65-1.36 (16.51-35.54)

Typical Application Heat-Shrinkable Molded Body O-Ring Rigid Nylon Nut