156 Order Online: www.waytekwire.com

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov

24 Hour FAX: 1-800-858-0319

Battery Management

Stock No. 80108 Stock No. 80620

Stock No. Eaton No. Voltage Input Voltage Output Output Amps

80109 12040E10 12 24 40 80095 12010E10 12 24 10 80104 21060E00 24 12 60 80105 21080E00 24 12 80 80106 21100E00 24 12 100

EQUALIZERS

Maintains battery balance or "equalization" in a dual voltage battery system Short circuit and over-current protected Reverse polarity protected Over/low voltage protection Optional output voltage shift terminal is available to aid in optimizing charging systems and serves as an ignition pin

SAE J1455 SAE J1113

185F (85C) -40F (-40C) (At full current, derated at higher temperatures) Stock No. 80109

Stock No. Eaton No. Voltage Input Voltage Output Output Amps

80111 12010C10 12 24 10 80119 12040C10 12 24 40 80108 21030C10 24 12 30 80176 21060COO 24 12 60 80178 21080C00 24 12 80 80179 21100COO 24 12 100 80117 41020C10 36/48 12 20 80116 71030I 72 12 30

CONVERTERS

Adjusts the input voltage in order to support dual voltage requirements Thermal overload shutdown Short circuit and over-current protected Reverse polarity protected Over/low voltage protection Low standby current drain Loss of ground protected Shock and vibration resistant models available Environmentally protected and splash-proof sealed models available

SAE J1455 SAE J1113

185F (85C) -40F (-40C) (At full current, derated at higher temperatures) While the Start Assist Signal Voltage (VSS) is applied to the Start Assist Input and the difference between the battery voltages are within the Start Override Battery Difference (VSBD), the contactor will be closed to assist with vehicle starting Voltage monitoring studs: (2) M8 studs

MAGNETIC LATCHING BATTERY SEPARATOR

Stock No. Trombetta No. Termination

80620 SBS-200-002 Waytek Stock No. 38173 80621 SBS-200-003 16 Ga. wire lead with ring terminal for 3/8" stud size 80622 SBS-200-001 (3) 18 Ga. wire leads with 1/4" male disconnects

Latching Battery Separator solutions feature a modern, integrated package that eliminates dated side saddle mounting of electronics on a standard solenoid with exposed busbars and wires. Available with Start Assist to provide a cost-effective and power-saving device ideal for all truck, RV, and emergency vehicle applications. 185F (85C) -40F (-40C)

16VDC 200A