147 Call Toll Free 1-800-328-2724 email: sales@waytekwire.com

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov

Battery Management

MASTER BATTERY DISCONNECT SWITCHES

Metal Bodied

Master battery disconnect switches are installed in electrical systems allowing the operator or technician to completely disconnect the electrical current running through your commercial vehicle or piece of equipment. Being able to isolate the flow of electricity has many safety, security, and cost-saving benefits. SPST switches disconnect the battery circuit only, while DPST options will disconnect the battery and the alternator or generator field circuit as well Plated steel case with a die-cast lever and copper contacts

3

/

4

" through hole installation Off-On circuit

Stock No. Type Continuous Rating Intermittent Rating Stud Size

44245 SPST 300A 2000A, 30 sec on, 5 min off (2)

1

/ 2" 44243* SPST 175A at 6VDC-36VDC 800A at 6VDC-36VDC, 15 sec on, 5 min off (2)

3

/ 8" 44242* SPST 40A at 6VDC, 20A at 12VDC 250A at 6VDC, 125A at 12VDC (2)

3

/ 8" 44244 DPST 300A 2000A, 30 sec on, 5 min off (2)

3

/ 8" (2) #10

* UL Listed 375m

6-36VDC

LEVER AND FLANGE PLATE FOR PADLOCK

Stock No. 44519

(Littelfuse No. 24505)

For use with Cole Hersee lever-actuated master disconnect switches with a

3

/4" diameter (19.1 mm) mounting stem: Stock No. 44242, 44243, 44244 Recommend the use of a padlock with a

5

/16" (7.9 mm) diameter shackle Includes: locking lever, bracket, and (2) #10-32 x

3

/8" screws Stock No. 43921

(Littelfuse No. 75903)

Intermittent rating: 1000A intermittent, 15 seconds On, 5 minutes Off Two-positions: Off-On 6-36V Contacts: brass Contacts: (2)

3

/8"-24 and (2) #10-32 stud terminals

BATTERY DISCONNECT SWITCH

12VDC 125A

Stock No. 43922

(Littelfuse No. 75904-01)

O-ring seal in the operating shaft, gasket sealed terminal insulator and locating pin DPST: will disconnect the battery and the alternator or generator field circuit Intermittent rating: 1000A intermittent, 15 seconds On, 5 minutes Off Two-positions: Off-On Contacts: silver plated Contacts: (2)

3

/8"-24 and (2) #10-32 stud terminals

WEATHER RESISTANT BATTERY DISCONNECT SWITCH

12VDC 125A

MASTER DISCONNECT SWITCH ES

180A continuous or 1,000A inrush One piece die-cast housing is 2

5

/8" dia. and 4

3

/ 8" long Mounting stem is

3

/4" dia. and

1

/ 2" long

Lever Operated

Stock No. 44030

(Pollak No. 51-902)

SPST Off-On for battery circuit only Does not disconnect alternator or generator Comes with face plate Stock No. 44032

3

/8" stud terminals Conforms to UL558

Lever Operated

Stock No. 44031

(Pollak No. 51-904EP)

DPST On-Off for battery and alternator or generator circuit Breaks alternator circuit (Max. of 20A) prior to disconnecting battery

3

/8" and #10-32 stud terminals

Key Operated

Stock No. 44029

(Pollak No. 51-916)

SPST Off-On for battery circuit only Does not disconnect alternator or generator Includes indexing post to prevent rotation

3

/8" stud terminals Conforms to UL558

Face Plate

Stock No. 44032

(Pollak No. 51-303)

For master disconnect switches with Off-On designation Polished aluminum with black letters Includes alignment hole For lever-operated switches Stock No. 44030 & 44031

6-36VDC

Stock No. 44243

Previous Page
Next Page