103 Call Toll Free 1-800-328-2724 email: sales@waytekwire.com

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov

Cable Ties

EDGE CLIPS

Designed to route bundles by securing them to the edge of a plastic or metal sheet without the need for a mounting hole High extraction force due to the integrated metal clamp that holds the edge clip in place Comes pre-assembled with a 50 lb. tensile strength black cable tie UV resistant, heat stabilized Stock No. 21301 Stock No. 21302 Stock No. 21303 221F (105C) -40F (-40C)

CABLE TIE MOUNTS

Stock No. 21255 Stock No . 212 87 Heat-stabilized UV-resistant nylon 6/6 Accepts all standard ties up to

1

/2

" wide

Stock No. HellermannTyton No. Mounting Hole Cable Tie

21255 HDM190HIRH4

3

/16

Standard cable ties 21256 HDM250HIRH4

1

/4

Standard cable ties 21257 HDM3120HIRH4

5

/16

Standard cable ties 21287 151-01224

3

/8

Hi-torque cable ties

All dimensions in inches.

Application Small tab contained inside the mounting hole temporarily engages threads, allowing assemblers to pre-install the mount on a stud before securing with a washer and nut (not included) Stock No. 21375

CABLE TIE ANCHOR MOUNT

4-way entry allows cable tie to secure bundles running parallel or perpendicular Quick installation - secures with a single screw

Nylon Black Stock No. HellermannTyton No. Mounting Type Screw Size Approx. Size Maximum Tie Width

21375 CTAM20C2 Screw #10 0.8 x 0.4 x 0.2 .200 21376 CTAM10C2 Screw #8 0.8 x 0.4 x 0.2 .200

All dimensions in inches.

Stock No. HellermannTyton No. Tensile Strength Approx. Length Approx. Max. Bundle Approx. Panel Thickness Description

21301 156-00539 50 lbs. 8 1.8 .039-.117 Wire bundle runs parallel to edge 21302* 156-00861 50 lbs. 7.9 1.8 .039-.117 Wire bundle runs perpendicular to edge 21303 156-00864 50 lbs. 8 1.8 .039-.117 Side mounted tie; wire bundle runs parallel

All dimensions in inches.

ORDERING NOTE:

*Attached cable tie is outside serrated to reduce bundle chafing

Stock No. 21470

(HellermannTyton No. HH-20)

Stand-off wire and cable bundles for easier cable tie applications Maximum bundle .83" 1.22" W x 2.12" H Application Harness board assemblies

WIRE RETAINER FOR HARNESS BOARDS CABLE FASTENING SYSTEM

Stock No. Thomas & Betts No. Stud Size

21296 XMNY-375-0-D

3

/8

21298 XMNY-625-0-D

5

/8

21299 XMNY-750-0-D

3

/4

All dimensions in inches.

4-way mounting system Mounts easily to existing studs Accepts ties up to .30" Stock No. 21298

AXIAL OVAL MOUNT

Stock No. 21260

(HellermannTyton No. SAM83HIRHSH1)

Accepts ties from .18" to .50" wide

5

/16

" mounting hole Application Stand off bundles from frame rails and cross members to prevent them from rubbing and chafing

HEAVY DUTY MOUNTING SYSTEM

Fir Tree Mount Stock No. 21291

(Tyton No. S3STM500HIRHSC2)

Stock No. 21290

(Tyton No. DSWS50HSK2)

Dual Swivel Saddle Mount

Mount rotates to any angle 250 lbs. minimum pull apart force Assembly requires two cable ties, one around each bundle Works best with the High-Impact Resistant Tie, Stock No. 21295 , sold separately on page 98

Saddle Mounts

High-impact, heat-stabilized black nylon Elevates bundles off mounting surfaces 185F (85C) -40F (-40C) 230F (110C) -40F (-40C) 230F (110C) -40F (-40C) 257F (125C) -40F (-40C) 257F (125C) -40F (-40C)