195 Call Toll Free 1-800-328-2724 email: sales@waytekwire.com

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov

Relays

PowerSeal Family

Designed specifically for electric vehicles requiring protection from tough environmental conditions, the PowerSeal family provides reliable power for electric pallet jacks, fork trucks, utility vehicles and more. Sealed to IP66/IP67 and passes IEC 60529

DC CONTACTORS

High Power Starter & Contactors

Plastic DC contactors are ideal for high volume, cost sensitive applications and are suitable for a variety of environmental conditions. Durable, high-temperature resistant plastic housing High-temperature coil assembly and brass carrier for the moving contacts stand up under punishing cranking duty Intermittent duty

Stock No. Amp Volts Coil Configuration

80460 200 12 Grounded 80461 200 12 Non-Grounded 80450 100 12 Non-Grounded 80451 100 24 Non-Grounded

140F (60C) -40F (-40C) 149F (65C) -40F (-40C)

Stock No. Volts

80400 12 80401 24 80402 36 80403 48

Bear Series

An economical solution to high current switching applications. Battery management and emergency starting applications serving large machinery, transportation and portable vehicles with multi-battery systems 100% continuous duty 225A continous rating Peak inrush 600A 185F (85C) -40F (-40C)

12/48VDC 225A

Defender Series

The Defender series is equipped with coil Transient Volt Suppression (TVS), a wide ranging current capability and a durable design making it the ideal choice for off-road and emergency equipment. Hermetically sealed to ensure reliable starting operation Designed to carry currents as low as 350 milliamps and as high as 200A Peak inrush 400A

Stock No. Amp Volts

80420 200 12 80421 100 24

185F (85C) -40F (-40C)

Reversing Polarity Family

Cost effective design consists of two DC contactors in a single housing unit creating easier product assembly and wire connection and reliable performance. Ideal for reversing motions such as truck winches and tarp systems Resistant to dust and splash from oil, gasoline, antifreeze, etc. 75A per 5 minutes 140A for 30 seconds

Stock No. Volts Mounting Bracket

80410 12 Flat 80411 12 Bracket for hose clamp 80412 24 Flat 80413 24 Bracket for hose clamp

140F (60C) -40F (-40C)

Metal Housing Family

Built to provide consistent electrical performance in a variety of high current switching and pole configurations. For use in applications from military vehicles and hydraulic controls, to stationary equipment Electromechanical devices utilize a metal casing to surround a DC contactor, which allows for higher applications ratings Continuous coil type

Stock No. Peak Inrush Volts

80470 600A 12 80471 500A 24

125A

140F (60C) -40F (-40C)

Continuous Duty Stock No. Volts Amp Bracket

80432 12 150 Flat 80630 12 200 Flat 80632 12 200 L-Bracket 80634 12 200 Curve 80433 24 150 Flat 80636 24 200 Flat 80638 24 200 Curve 80640 48 200 Flat 80642 48 200 L-Bracket 80644 48 200 Curve

Intermittent Duty Stock No. Volts Amp Bracket

80430 12 150 Flat 80431 12 150 Curved L 80631 12 300 Flat 80633 12 300 L-Bracket 80635 12 300 Curve 80637 24 300 Flat 80639 24 300 Curve 80641 48 225 Flat 80643 48 225 L-Bracket 80645 48 225 Curve

Stock No. 80460 Stock No. 80400 Stock No. 80420 Stock No. 80432 Stock No. 80410 Stock No. 80471

Previous Page
Next Page